Programs (they are not called sketches here) in Atmel Studio are mostly written in C. If you don’t know what to do, please read my last post. You might also use a breadboard adapter or choose on-board programming on the AVR Dragon. How you do this in concrete terms and whether you still need an external power source for the ATtiny85 depends on the programmer you are using. So simply MISO to MISO, MOSI to MOSI, VCC to VCC, etc. You must now make sure that you connect the programmer according to the connection schemes. The pinout of the ATtiny85 looks like this: Pinout of the ATtiny85 The only major decision to make during installation is which MCU family you want to program with Atmel Studio: On a not entirely new laptop, the installation of the entire software package took about half an hour and 4 GB of disk space was needed. However, the whole thing takes some time.

The installation is not difficult, as almost everything happens automatically. It requires a continuous Internet connection. The web installer is the recommended variant. If you follow the link, there is a web installer and an offline installer. Installation of Atmel Studio 7Ītmel Studio 7 is a free development environment for programming Atmel MCUs, which can be downloaded here from the Microchip Technology Inc. If your programmer is not debugging, you can at least reproduce the first two topics. I assume that you have a debugging programmer like the AVR Dragon or the Atmel-ICE. uploading a simple blink program to an ATtiny85.In detail, this is a step-by-step guide to:

If you have questions about the programmers in this article, they may be answered there. I described suitable programmers for Atmel Studio in my last post. I had already briefly mentioned Atmel Studio in my post about the programming of ATtiny85 & Co, but because of the scope of this topic I could not go into any details. But it’s worth it and with this post, I want to make it easier for you to get started.

You get used to it, but first it can be a bit daunting because much of this program is anything but self-explanatory. As easy as it is for one to get started with the Arduino, it is so peculiar working with Atmel Studio at the beginning. The next logical step is to get started with Atmel Studio, currently Atmel Studio 7 ( Addendum: in 2020 Atmel Studio has been renamed to Microchip Studio). However, the Arduino environment is only partially suitable for this purpose. and at some point you want to understand these things. You come across registers, port manipulation, fuse bits, signatures, C programs, etc. In the course of time, however, one also notices that there are even deeper levels into which it is worth getting in. Many amateur electronics technicians enter the world of microcontrollers (MCU) via the Arduino, as this path is easy to understand even for beginners.

Atmel studio 7